A Leading-Edge Liquid Fortifier Brand by DRiBOND Concrete Overlay Solutions LLC

border_bond_paver-updtated

BorderBond

BorderBond® is a ready-to-use liquid fortifier that mixes with DriBond® to bond border pavers firmly to the concrete base.

BorderBond®

Applications

  • Residential Driveways Sidewalks, Pool Decks, Patios, Courtyards, and Garage Floors
  • Commercial and Light Industrial Driveways, Sidewalks, Walkways, and Courtyards

Properties

  • Easy to Use—Straight From the Bottle
  • Easily Mixes With DriBond®
  • Maximizes Bond Strength of DriBond®

Directions

Before proceeding with the installation, make sure you have an up-to-date technical data sheet and watch the application video. ALWAYS TEST on a small hidden area of approximately 4 sq ft to ensure that the result meets your expectations.

See Warranty

  • Shovel or Garden Hoe
  • Mixing Whip and Drill (Optional)
  • Wheelbarrow or Any Suitable Mixing Container
  • 1/2” by 1/2” Square Notch Trowel or Margin Trowel

Shake the container well before use, and do not dilute. Mix one bag of DriBond® with one container of BorderBond®. To obtain a uniform consistency, we recommend mixing both products gradually in two or more doses. The mix must have a smooth, creamy consistency.

Application

Remove any dry DriBond® from the border areas. The surface must be clean and dry.
Using a 1/2” by 1/2” square notch trowel or a margin trowel, apply the mix to the borders and transitions as necessary. This will create a mortar bed on which to lay the pavers.

Install border pavers as described on the DriBond® bag or technical data sheet. Remove any excess product from the edge of the finished paved area. There should be no air pockets or voids under the border pavers. Never allow the border pavers to protrude past the edge of the existing concrete.

Note: Although not mandatory, wetting the concrete surface before applying the BorderBond® mix will ensure optimal bond strength and adhesion.

Coverage

1.58 gal of BorderBond® mixed with one bag of DriBond® covers approximately 30 linear feet, based on a 12-inch wide border. The coverage will depend on the surface condition and desired BorderBond® bedding thickness.

Product Coverage

4” 90 to 120 Ft
6” 60 to 70 Ft
9” 40 to 45 Ft
12” 30 to 35 Ft
border_bond_paver-updtated

Shelf Life and Storage

The product can be stored for two years when kept in an unopened container and a cool and dry place, away from the sunlight, and with adequate ventilation. For an opened container, shelf life is approximately two hours.

Cleaning

Clean tools and hands with warm water.

Safety Warning

KEEP OUT OF REACH OF CHILDREN.

First Aid

Eye Contact

Check for and remove any contact lens. Immediately flush eyes with water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention if symptoms occur.

First Aid for Skin Contact

Wash contaminated skin with soap and water. Get medical attention if symptoms occur.

Inhalation

Move the exposed person to fresh air. If not breathing, the breathing is irregular, or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Loosen tight clothing such as the collar, tie, belt, or waistband. Get medical attention if symptoms occur.

Ingestion

Wash out mouth with water. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention if symptoms occur.